novatec hubs sound

I ended up buying a new set of end caps for the front and was very very careful fitting them on. Hub rear D412SB-CL-X12-A4A-XDR, straight pull, polished anodized black, 28 key hole, Axle alloy 12x142 for thru axle, D:45.9, 5xNBK Bearings, black side caps, Novatec 360 logo, OEM My husband has blown 4 Novatec hubs within the last year. ... All those engagement points–72 of them, in fact–do a lot more besides making the hub sound cool. Novatec A291SB F482SB hub; Novatec A291SB F482SB hub. By Haystack Calhoun in forum Drivetrain - shifters, derailleurs, cranks Road Bike Novatec Hub AS511SB/FS522SBFront Weight: 72g Sealed bearings: 2Spoke holes: 20 Gauge: 14 O.L.D.

LUKAS KNOPF-FINALE beim Crankworx Rotorua in NEUSEELAND! I only use for XC and am light on parts but the weight is great for that price (rear = 269g, front = 139g)No marks on freehub and running single speed (albeit a wide base cog)I’ve got a set of Superstar Switch Ultra front and Switch rear hubs on one set of wheels and if they are Novatecs then they’re holding up very well after 6 months of abuse. After today’s ride the sound on my hub is a lot quieter than before. We will process your personal data (email) for this purpose only in accordance with applicable laws and privacy policies. No compliants at all, light enough good price and keep working.Superstar switch are Novatec D881SB/D882SB I think.They have an extensive range – as mentioned they are often used as OE hubs which are rebranded by many manufacturers, so I imagine quality varies from cheap budget stuff to faily high end:I built a rear wheel for my commuter/ winter road bike from heir £35ish rear hub, and it’s still spinning like new two years later, and weighs about the same as the DT 240s it replaced!I’ve got a pair of 7series disc hubs for my cyclo cross race wheels, as relatively cheap and light, and supporting a road 11spd cassette. My LBS returned it to SC as a warranty claim. The front hub features Novatec’s 4-in-1 compatibility, consisting of three sets of inserts that allow the wheel to be installed as a QR, 9-millimeter, 15-millimeter or 20-millimeter through-axle. HBR D412CB-CL-X12-A4ALS-11S, straight pull, CENTER LOCK, black, UD shinny carbon hub tube, 24H/14G, key hole, 4-pawls, with Novatec logo, axle alloy 12x142 for thru axle, D:45.9, 4xNBK bearings, black side caps, OEM So they break off, not bend as some hub splines do (Hope)The Superstar Switch hubs (99.9% sure they are novatec) are very good for the money and you can get a steel freehub for them. Get interesting information as first Since I’ve been doing that, I no longer get mashed freehub bodies.Got a pair on my 29er, bought from ebay guy from PolandThe topic ‘Novatec Hubs – any good?’ is closed to new replies.Premier Partners for Singletrack issues & exclusive subscriber perks No compliants at all, light enough good price and keep working.Superstar switch are Novatec D881SB/D882SB I think.They have an extensive range – as mentioned they are often used as OE hubs which are rebranded by many manufacturers, so I imagine quality varies from cheap budget stuff to faily high end:I built a rear wheel for my commuter/ winter road bike from heir £35ish rear hub, and it’s still spinning like new two years later, and weighs about the same as the DT 240s it replaced!I’ve got a pair of 7series disc hubs for my cyclo cross race wheels, as relatively cheap and light, and supporting a road 11spd cassette. Again, can’t fault.They do a very wide range, and even the same level of hub comes in different options (different bearings, some have a steel strip on the freehub body), but I think they are great value for money, and wouldn’t hesitate to use them in whatever wheels I build next.Regarding mashing freehub bodies – the trick is to do the lockring up really tight. I won't say for certain due to it being winter and Ive been on the bike less, but feels like less engagement on the sramUPDATE: As i posted 2 weeks ago, the rear hub on my 2018 SC Hightower 29S was defective. Turns out one of the pawls on my novatec hub broke. Hub rear D412SB-X12-A4ALS-11S, straight pull, polished anodized black, 24 key hole, Axle alloy 12x142 for thru axle, D:45.9, 4xNBK Bearings, black side caps, Novatec logo, OEM Why not go for a new rim too, or a whole new wheel?My Hightower LT just came in earlier this week. View as Grid List. Fast forward to winter season, and I pick up a fat bike with the D202SB rear hub.

They run very smoothly, the freehub isn’t as loud as my Hope Pro 2 Evo but still makes a nice even sound. Hub rear D412SB-CL-X12-A4A-XDR, straight pull, polished anodized black, 24 key hole Axle alloy 12x142 for thru axle, D:45.9, 5xNBK Bearings, black side caps, Novatec 360 logo, OEM Hub rear D412SB-X12-A4ALS-11S, straight pull, polished anodized black, 28 key hole, Axle alloy 12x142 for thru axle, D:45.9, 4xNBK Bearings, black side caps, Novatec logo, OEM Set Descending Direction. I had novatec hubs on a recent set of wheels.